Waterplug

Short Detail
WATERPLUG is a high performance setting accelerator mortar more than any portland cement, blast furnace and puzzolanic admixture in setting accelerators, which makes it possible to work on very tricky surfaces.

---

WATERPLUG is a high performance setting accelerator mortar more than any portland cement, blast furnace and puzzolanic admixture in setting accelerators, which makes it possible to work on very tricky surfaces. 
 
Uses 
• To stop penetrating pressure flows through cracks, gravel nests, holes in buried concrete or masonry structures where conventional or epoxy resin mortar would be damaged and do not adhere. 
• To treat the concrete / masonry wall slab junction of a buried structure prior to the application of the waterproofing plaster SEALING MP. 
• To treat the sail / raft joint in the case of a casing (dripping support). 
• To repair buried masonry joints. 
• To repair concrete surface defects. 
• For quick seals, pipe passages. 
• To temporarily treat active cracks and back pressure expansion joints. 
Technical Performance  Appearance: Gray 
Max. Particle size: 0.8mm 
Wet density of the mixture 2.14 kg / lt 
Practical duration of use 1 to 2 min. 
Final setting time 2 to 3 min. 
Mechanical resistance (MPa) N / mm² 
Compression 30 min. > 12 
24 hours> 20 
28 days> 50 
Flexion 30 min. > 2.5 
24 hours> 4,5 
28 days> 7.0 
 
 
DESCRIPTION 
WATERPLUG is a compound of special cements, carefully calibrated silica sands and specific additives. WATERPLUG is supplied in powder form and simply requires the addition of water to form a ready-touse, high-speed plugging mortar. 
 
Characteristics 
Durable  - Free of chlorides, protects reinforcements from corrosion. - Expands when drying, ensures watertightness. - Mechanical characteristics similar to those of concrete. - Economic - Ultra fast grip even under water pressure. 
- Blocks the water supply without injection tools. - Easy to apply - Simply mix with clean water. - Ecological - Based on cement. - Without solvents.