ML HYBRID®

Short Detail
A cement and acrylic-based, semi-elastic, two components water isolation material. Components must be mixed before application. Resistant to positive water pressure.

---

Description:

A cement and acrylic-based, semi-elastic, two components water isolation material. Components must be mixed before application. Resistant to positive water pressure.

 

Uses:

·         Indoor and outdoor

·         Horizontal and vertical applications

·         Wet areas, such as bathroom, kitchen, balcony

·         Water tanks, swimming pools (under the coverage)

·         Groundwork isolation

·         Isolation of deck roofs

·         Retaining walls

·         Isolation of concrete flower receptacle

Application:

Attention must be given that the application surface is cured.

The application surface must be clear of materials which prevent bonding, such as dust, oil, paint, silicone, curing agents, detergents and mold release oils.

Weak parts of the concrete must be repaired, plasters that are not well adhered must be removed, the surface must be flat and sound, static cracks on the building must be repaired with a plaster containing TURKQUA Mix LATEX . Dynamic (moving) cracks must be repaired Polyurethane Sealant. Irons and wedges on the surface must be removed and the holes that have water outflow must be filled with appropriate products.

The surface must be saturated with water and must be kept moist during the application.

 

Put Component B (6 kg) in a clean pot. Add Component A (20 kg) into the liquid slowly and mix preferably with a drill with low speed until there are no lumps. Do not add water. Leave the mixture to mature for 3 - 5 minutes, mix again for 30 seconds before usage.

The mixture in the pot must be used within 30 minutes. In case this duration is exceeded, the mortar should not be used.

TURKQUA Etanche Membrane Liquide Isolation Material is applied on the surface at least in 2 layers that are perpendicular to each other. There must be a waiting period between two applications, minimum 5 - 6 hours – maximum 24 hours, at +20°C. Second layer must be applied before the first layer is completely dry. In case the first layer is dry, the surface must be moisturized again before the application of the second layer. The surface must be protected from sunlight and prevented from drying quickly, for 3 days after the application of the second layer.

After the application of the first layer, the corners have to be beveled before the application of the second layer.

It is recommended to use a mesh between the coats.

It gains mechanical strength in 3 days, becomes waterproof in 7 days. It gains its final strength in 14 days.

It has to be protected against any impact until it is over-coated.

 

 

Product Data:

Appearance                                                 :         Component A: Grey colored fine powder

                                                                                   Component B: White colored liquid

Mixing Rate                                                 :         6 kg liquid / 20 kg powder

Resting Period                                            :         3 - 5 minutes

Flexibility                                                      :         Good

Application Temperature                       :         Between +5°C and +35°C

Time to Use                                                 :         Mechanical Strength: 3 days / Waterproofness: 7 days

Time to Cover                                             :         3 days

Consumption                                              :         1 - 1,5 kg/m2 is applied on each layer, in 1 mm thickness. It is recommended that at least 2 layers are applied (2 - 3 kg/m2). On areas where stronger protection is required, the consumption may increase up to 3 - 4 kg/m2.

Packaging and Storage:

Component A: 20 kg craft bags
Component B: 6 kg plastic drums

Unopened packages can be stored in dry environments for 12 months and stacked 10 packages on a pallet. Shake the liquid component before use and protect it against frost.